Power Switching Systems are usually build up in a bus topology, e.g. all device are connected in a row over the same cable. If in such a configuration one device fails, the complete device chain will break down, too. Trouble shooting is difficult and leads to unacceptable down times of the complete system.
The power switch X-Bus Extender is the right solution to limit the downtimes in your power switching system. The X-Bus Extender takes over the function of a central hub and allows your to connect up to 4 power switches in a star topology. In case one of the four power switches fails, the others will not be affected any more.
Trouble shooting becomes much easier and faster.
The X-Bus Extender is equipped with a redundant power supply for a reliable operation. It features four RJ-45 ports that can be either connected to a power switch, to a sensor monitoring temperature, humidity, light… or a digital input module for dry contact control of magnetic door contacts, smoke, water detectors and so on. The power switches or sensors can be placed up to 200 meters away from the X-Bus using standard CATx cables. If your system grows, just cascade multiple X-Bus Extenders according to the number of ports needed.
Power Switch X-Bus Extender also offers a serial RS232 port for software developers who want to create their own individual monitoring system. This protocol will be implemented in all xBus peripherals Please call our FREE TECH SUPPORT for more details.
Whatever your needs are today and tomorrow, is the right choice allowing you
to create a high available, flexible and scalable power switching and monitoring solution.
(4) RJ-45 input;
(1) RJ-45 up-link;
(1) DB9 F RS232/V.24 management
Distance (max.) — 200m
Indicators — TxD, RxD, (3) power, (1) traffic/port
Size — 4H x 17W x 5,5D cm
Housing — metal
Operating Temperature — 0 to 40°C
Humidity — 10 to 80% non condensing
Modular CatalogueThe book no IT-Specialist can do without!
Mail a friend